FLA-T Series
Temperature Integrated
One of three wires of this strain gage is made of copper-nickel alloy, while other two wires are made of ordinary copper. A T-type thermocouple is composed by a copper-nickel wire and a copper wire. Strain measurement by quarter bridge 3-wire method and temperature measurement by thermocouple are possible with one strain gage. This gage must be measured by TML data loggers.
| Main Test Materials | Metal | Materials Backing | Epoxy |
| Operating Temperature | -20 to +80°C | Materials Element | Cu-Ni alloy foil T-thermocouple |
| Compensation range | +10 to +80°C | Strain limit | 3% (30000×10-6) |
| Bonding adhesive | CN,P-2 | Fatigue life at room temp. | 1×106 (±1500×10-6) |
- 0.08mm2 PVC lead wire pre-attached
- Total resistance of lead wire per meter:0.44(Ω)(as for copper wire)
| Type | Gage length (mm) |
Gage width (mm) |
Backing length (mm) |
Backing width (mm) |
Resistance (Ω) |
Lead wires length |
| FLA-1T-XX-3LT |
1 | 1.3 | 5 | 2.5 | 120 | 3-wire 3m |
| FLA-2T-XX-3LT |
2 | 1.5 | 6.5 | 3 | 120 | 3-wire 3m |
| 5 | 1.5 | 10 | 3 | 120 | 3-wire 3m |
Temperature integrated gages are available for other series of strain gages. Contact TML for detail.