FTP Series
Protected Gage
This gage was developed for rapid, on-site strain measurements without the need to connect the lead wire or apply waterproofing or mechanical protection. The gage is sealed in epoxy resin, housed in a light but rigid plastic case, and comes with a 5-meter long integral wire. It is available in several configurations: a single axis gage with 3-wire connection, a 2-axis cross gage, or a 3-axis rosette and full bridge pattern.
| Main Test Materials | Metal | Materials Backing | Epoxy |
| Operating Temperature | -20 to +80°C | Materials Element | Cu-Ni alloy foil |
| Compensation range | +10 to +80°C | Strain limit | 3% (30000×10-6) |
| Bonding adhesive | CN,EB-2 | Fatigue life at room temp. | 1×106 (±1000×10-6) |
| Type | Gage length (mm) |
Gage width (mm) |
Resistance (Ω) |
Bridge configuration |
| FTP-5-11-5LT | 5 | 1.5 | 120 | 3-wire |
| FTP-2C-11-5L | 2 | 0.9 | 120 | 2-wire |
| FTP-2R-11-5L | 2 | 0.9 | 120 | 2-wire |
| FTP-2B-11-5L | 2 | 2.2 | 350 | Full bridge for axial strain |
| FTP-2S-11-5L | 2 | 2.2 | 350 | Full bridge for shearing strain |