CN Accelerator/Surface Preparation Agents
CN accelerator
This accelerator is used only for CN and CN-E adhesives. A cyanoacrylate adhesive chemically reacts with moisture in the air and rapidly cures at room temperature. An excessively dry or low temperature can lengthen the curing time or cause failure in adhesion. This accelerator improves bonding performance for ambient conditions such as these.
Content : 10ml × 2 bottles
Surface preparation agent A (for concrete)
This is a powder substance, packed in a can, which is used to pre-treat the concrete surface. When bonding a strain gage to concrete in early state of aging or water-curing, this agent absorbs moisture from the concrete surface, which would otherwise delay the adhesion.
Content : 500g